https://conversionupgradekit.com Sat, 24 Oct 2026 06:35:40 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://conversionupgradekit.com/topline-grk-evo-conversion-chassis-kit-110-rc-drift-upgrade-parts-set/ https://conversionupgradekit.com/topline-grk-evo-conversion-chassis-kit-110-rc-drift-upgrade-parts-set/#comments Thu, 24 Sep 2026 07:04:38 +0000 https://conversionupgradekit.com/topline-grk-evo-conversion-chassis-kit-110-rc-drift-upgrade-parts-set/




There are some scratches from use. The purple GRK plate is glued on, so I’ll include it as a bonus. This change allows U. Order Confirmation and Important Information (For Customers Outside the United States). Please check the Photo. We cannot change an address after the order has already been placed. We provide valid Tracking Numbers for all orders. If it is changed to Expedited, there will be no additional charge, so please rest assured. If you have any questions or issues, we are at your service.

]]> https://conversionupgradekit.com/topline-grk-evo-conversion-chassis-kit-110-rc-drift-upgrade-parts-set/feed/ 0 https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rc-drift-chassis-upgrade-kit/ https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rc-drift-chassis-upgrade-kit/#comments Tue, 22 Sep 2026 19:01:39 +0000 https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rc-drift-chassis-upgrade-kit/




Rêve D RDX MC-III Conversion Kit RC Drift Chassis Upgrade Kit. [Brand New/Unused] Reve D MC-3. This is the Reve D MC-3. It is a brand-new, unused item. I have kept it in storage since purchasing it, as I never had the opportunity to use it. Unit: Brand new and unused. Accessories: All original accessories included. There are no issues with the product itself, but please refrain from purchasing if the condition of the outer box is a concern for you. Please check the photos to confirm the condition and ensure you are satisfied before purchasing. Although this is a brand-new, unused item, it has previously been in someone else’s possession; therefore, please refrain from purchasing if you are sensitive to minor details. This change allows U. International Buyers – Please Note.

]]> https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rc-drift-chassis-upgrade-kit/feed/ 0 https://conversionupgradekit.com/carbon-rc-chassis-conversion-upgrades-kit-for-tamiya-top-force-evo-4wd-buggy-car/ https://conversionupgradekit.com/carbon-rc-chassis-conversion-upgrades-kit-for-tamiya-top-force-evo-4wd-buggy-car/#comments Wed, 09 Sep 2026 18:35:41 +0000 https://conversionupgradekit.com/carbon-rc-chassis-conversion-upgrades-kit-for-tamiya-top-force-evo-4wd-buggy-car/













Brand new and made of high quality material. Novel appearance and exquisite workmanship. Carbon fiber lower deck that are useful for improving the performance and setting of RC cars. It has as high impact resistance and rigidity, so you can experience the difference in operability. Lightweight and easy to install. Compatable with Tamiya Top Force Chassis. Product Name: RC Chassis Kit. Product Material: Carbon Fiber. 1pcs RC Chassis Kit. Remark: The carbon battery. Only fit for short battery! Doesn’t include other. Buyers are responsible for such charges. We recommend that you try again after 3-4 days. We will reply you ASAP. Enjoy your shopping here!

]]> https://conversionupgradekit.com/carbon-rc-chassis-conversion-upgrades-kit-for-tamiya-top-force-evo-4wd-buggy-car/feed/ 0 https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rkd-mc3-rc-drift-chassis-upgrade-kit-new/ https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rkd-mc3-rc-drift-chassis-upgrade-kit-new/#comments Fri, 21 Aug 2026 17:56:39 +0000 https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rkd-mc3-rc-drift-chassis-upgrade-kit-new/




Brand new, unopened RDX conversion kit MC-III RKD-MC3 RC part. [Product Description] ReveD RKD-MC3 RDX Conversion Kit. This change allows U. Order Confirmation and Important Information (For Customers Outside the United States). Please check the Photo. We cannot change an address after the order has already been placed. We provide valid Tracking Numbers for all orders. If it is changed to Expedited, there will be no additional charge, so please rest assured. If you have any questions or issues, we are at your service.

]]> https://conversionupgradekit.com/reve-d-rdx-mc-iii-conversion-kit-rkd-mc3-rc-drift-chassis-upgrade-kit-new/feed/ 0 https://conversionupgradekit.com/reve-d-rdx-wrap-up-next-cross-conversion-kit-rc-drift-chassis-upgrade-parts/ https://conversionupgradekit.com/reve-d-rdx-wrap-up-next-cross-conversion-kit-rc-drift-chassis-upgrade-parts/#comments Sat, 25 Jul 2026 04:57:39 +0000 https://conversionupgradekit.com/reve-d-rdx-wrap-up-next-cross-conversion-kit-rc-drift-chassis-upgrade-parts/




Please check the Photo. Any other questions will be answered within 48 hours.

]]> https://conversionupgradekit.com/reve-d-rdx-wrap-up-next-cross-conversion-kit-rc-drift-chassis-upgrade-parts/feed/ 0 https://conversionupgradekit.com/tamiya-tt-02-rwd-drift-conversion-kit-full-set-ver-2z-rc-chassis-upgrade/ https://conversionupgradekit.com/tamiya-tt-02-rwd-drift-conversion-kit-full-set-ver-2z-rc-chassis-upgrade/#comments Sat, 18 Jul 2026 16:44:50 +0000 https://conversionupgradekit.com/tamiya-tt-02-rwd-drift-conversion-kit-full-set-ver-2z-rc-chassis-upgrade/








Please check the Photo. Any other questions will be answered within 48 hours.

]]> https://conversionupgradekit.com/tamiya-tt-02-rwd-drift-conversion-kit-full-set-ver-2z-rc-chassis-upgrade/feed/ 0 https://conversionupgradekit.com/alloy-chassis-carbon-fiber-conversion-kit-for-team-associated-dr10-drag-3/ https://conversionupgradekit.com/alloy-chassis-carbon-fiber-conversion-kit-for-team-associated-dr10-drag-3/#comments Wed, 08 Jul 2026 04:22:46 +0000 https://conversionupgradekit.com/alloy-chassis-carbon-fiber-conversion-kit-for-team-associated-dr10-drag-3/









Alloy Chassis & Carbon Fiber Conversion Kit for Team Associated DR10 Drag. 14 Years & Up. OVERVIEW Transform the performance and looks of your stock Associated 1/10 DR10 Drag RTR with our new Alloy & Composite Chassis Conversion. The conversion starts with a stiff 1-piece alloy main chassis plate, and features composite shock towers, side rails, stiffeners, and front body brace guard. Also included are anodized alloy bracing, bulkheads, and body mounting posts, while quick and easy to use battery straps allow for different battery sizes. The conversion set is available in five different colors. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Item# C32548BLACK Barcode: 91789044432. Compatible Scale: 1:10. Compatible Brand: For Associated. Compatible Fuel Type: Electric. Age Level: 14 Years & Up. Fitment & Installation Notes. A majority of our aluminum upgrade kits, conversions, and alloy parts are designed to replace, modify, or upgrade the stock plastic parts with aluminum versions. Products may feature a different design language that may not be identical in design to the OEM version. Unless specified, not all products include new hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. That is different from what is originally shown in the website product photos; however, any alternates will be compatible hardware that will not affect the functionality of the product. Most of our products DO NOT include instructions, and are meant to be completely installed by an experienced hobbyist; this includes product assembly/disassembly, any set-up and adjustment, and periodic maintenance. Third party products may have available instructions online from their respective manufacturers. All products will require some prep out of the package. Some items shocks, gearboxes, axles, etc. Are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, anti-seize, grease, or liquid thread lock for critical fasteners and any metal to metal contact. Do not just install the item out of the package and assume they are prepped correctly. Check, adjust, and set/reset all new items when taken out of the package. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items that are different from the OEM part may require modification to the vehicle for proper clearance. Some products are designed with tighter tolerances and/or include parts that need some pre-race or “break-in” periods in order to get the item into condition for regular use. Snow and sand tracks need to be broken-in to stretch to the correct tension, and new tires need to lose a small amount of the outer surface to expose the actual tire tread that will give traction. This break-in period also allows you to see that everything is working properly before giving it “full gas”. A proper break-in basically consists of driving your vehicle with the new parts installed at slow to medium speeds, with smooth throttle modulation. Do not go full throttle, do not do large jumps, and any high-stress activities yet. The break-in process should only last around 2-3 battery packs (or 2-3 tanks of fuel if nitro). Upon completing break-in, be sure to recheck, adjust, and set/reset the items. Suspension shocks (individual and sets) may be packaged partially assembled for display purposes only and require standard shock prep before installation and usage. All new shocks should be cleaned, reassembled, and may require RC-grade silicone shock oil before being used. Shocks need to be cycled so that the internal seals can conform to the shock shaft and body, during the initial break-in period shock may partially leak until the seals are seated correctly. Wheel and tire sets may be packaged partially assembled for display purposes only and require standard wheel/tire prep before installation and usage. All wheels and tires should be cleaned, reassembled, and may require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description). Integy-branded items are designed and tested to be compatible with the vehicle’s OEM parts but may not be compatible with other branded aftermarket parts. We do not guarantee compatibility with vehicles using third-party branded products. Some Integy-branded items may be only compatible with the vehicle’s OEM parts but not with another Integy-branded item due to design limitations. Some items that are different from the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. We carry thousands of anodized alloy parts, and for the most part the colors specified i. Match or are very close to each other in terms of color shade, but the reality of anodizing is that it is almost impossible to match every production run exactly as the last. Variations in color shade can be attributed, but not limited to the following factors: material content, ambient conditions during manufacturing, and place of manufacture. Because of this, we cannot guarantee 100% that all anodized colors of a particular shade will match 100%. For example: not all “blue” products will be the exact same shade of blue as other products. Thus, what is shown in the product photo (including the shade/color) is as accurate as possible to the real-world color of the part we have available. Often we will try to color match the OEM chassis colors (when possible), but we do not guarantee an exact color match. Also, we do not color-match with other aftermarket brands; the color/shade of color we show on our website and product photos is the color/shade of color we sell. We can only offer limited services for these 3rd-party branded items (subject to availability). Please make sure all desired items are added to your cart before paying. It is important to note that under the. Q: Will the item color match the photos? We photograph our products as accurately as possible. The actual part color will closely match what you see in the listing photos. However, slight variations may occur due to lighting, screen settings, and manufacturing tolerances. Minor shade differences between production batches are normal. Q: Can I request a color change after checkout? We appreciate your understanding and cooperation. If you have any questions before purchasing, feel free to message us – we are happy to assist! Since 2010, RC Option has been a trusted retailer in the RC hobby. With over a decade of experience, our store has provided RC enthusiasts a place to get all of their RC needs, from ready-to-run cars and boats, to replacement and upgraded wheels and tires, electronic equipment, scale crawler accessories, and more. We offer products from many well-known brands such as Integy, 3Racing, SkyRC, MuchMore, RC Square, and more. From weekend hobbyists to competitive racers, we’re proud to provide all RC enthusiasts a place to find exactly what they need! Extended +5mm Wheel Hex for 1/8 Kraton 6S 4X4 Brushless Speed Truck ARA311117. Evo-6 Billet Machined Alloy Wheelie Bar for Traxxas 1/10 E-Revo (-2017) & Summit. Steering Blocks for E-Revo (-2017), E/T-Maxx & Summit w/ T4122 Conversion 5334. Alloy Rear Shock Tower for Losi 1/18 Mini-T 2.0. Alloy Slipper Clutch Eliminator for 1/10 E-Revo (-2017), Summit & Revo 3.3. 40T Steel Spur Gear for 1/10 Revo & Slayer(both). Billet Machined Slipper Clutch Eliminator for 1/10 E-Revo, E-Maxx & Summit. Billet Machined Alloy Wing Mount for Traxxas 1/10 Revo & E-Revo (-2017). Billet Machined Front Bulkhead for Traxxas 1/10 E-Revo (-2017) & Revo 3.3 5330. Billet Machined Rear Bulkhead for Traxxas 1/10 E-Revo (-2017) & Revo 3.3 5329. Billet Machined Wheelie Bar for Traxxas 1/10 Revo & E-Revo (-2017). Evo-6 Machined Gear Cover (Single Motor) for Traxxas 1/10 E-Revo (-2017) 5677. Alloy Machined Front Camber Block for Losi 1/18 Mini-T 2.0. Add suggested items to your listings.

]]> https://conversionupgradekit.com/alloy-chassis-carbon-fiber-conversion-kit-for-team-associated-dr10-drag-3/feed/ 0 https://conversionupgradekit.com/embieracing-tamiya-ta02-carbon-chassis-rebuild-kit-conversion-set-rc-car-upgrade-2/ https://conversionupgradekit.com/embieracing-tamiya-ta02-carbon-chassis-rebuild-kit-conversion-set-rc-car-upgrade-2/#comments Thu, 25 Jun 2026 15:47:57 +0000 https://conversionupgradekit.com/embieracing-tamiya-ta02-carbon-chassis-rebuild-kit-conversion-set-rc-car-upgrade-2/


















This kit contains lower and upper chassis, steering conversion and other accessories. All parts are made of CNC machined carbon plate 2,5 mm thick. With this kit, you can change battery position to achieve required weight distribution and better steering performance is achieved as well. Additional modification of other chassis parts may be required for best performance (not neccesary). Shape of the parts can be slightly modified (updated versions). Lower chassis plate. Front and rear spacer for lower plate. Knuckle arms levers/extenders. Threaded steering rods. 12 pcs M3 nuts. Please check first, that you have Tamiya TA02. Distance on your original chassis mounting holes should be 208mm. Otherwise you have probably TA01 which has longer chassis. Every order is tracked, but I don’t provide tracking numbers unless there is some problem or delay. Thank you for understanding.

]]> https://conversionupgradekit.com/embieracing-tamiya-ta02-carbon-chassis-rebuild-kit-conversion-set-rc-car-upgrade-2/feed/ 0 https://conversionupgradekit.com/reve-d-mc-1-conversion-kit-for-yd-2-slide-rack-rc-drift-chassis-upgrade/ https://conversionupgradekit.com/reve-d-mc-1-conversion-kit-for-yd-2-slide-rack-rc-drift-chassis-upgrade/#comments Mon, 22 Jun 2026 08:12:40 +0000 https://conversionupgradekit.com/reve-d-mc-1-conversion-kit-for-yd-2-slide-rack-rc-drift-chassis-upgrade/




Reve D MC-1 Conversion Kit for YD-2 Slide Rack RC Drift Chassis Upgrade. This is a conversion kit for the YD-2 with slide tracks, model MC-1. It is brand new and unopened. Please understand that it has been stored by a private individual before purchasing. This change allows U. International Buyers – Please Note.

]]> https://conversionupgradekit.com/reve-d-mc-1-conversion-kit-for-yd-2-slide-rack-rc-drift-chassis-upgrade/feed/ 0 https://conversionupgradekit.com/yokomo-yd-2rx-conversion-kit-red-version-short-li-po-drift-chassis-upgrade-kit/ https://conversionupgradekit.com/yokomo-yd-2rx-conversion-kit-red-version-short-li-po-drift-chassis-upgrade-kit/#comments Sun, 21 Jun 2026 20:11:42 +0000 https://conversionupgradekit.com/yokomo-yd-2rx-conversion-kit-red-version-short-li-po-drift-chassis-upgrade-kit/




This change allows U. Order Confirmation and Important Information (For Customers Outside the United States). Please check the Photo. We cannot change an address after the order has already been placed. We provide valid Tracking Numbers for all orders. If it is changed to Expedited, there will be no additional charge, so please rest assured. If you have any questions or issues, we are at your service.

]]> https://conversionupgradekit.com/yokomo-yd-2rx-conversion-kit-red-version-short-li-po-drift-chassis-upgrade-kit/feed/ 0