https://conversionupgradekit.com Fri, 28 Aug 2026 18:11:40 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-3/ https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-3/#comments Tue, 25 Aug 2026 18:05:37 +0000 https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-3/


BMW MINI GENUINE R56 REAR TRAILING ARM UPGRADE / CONVERSION KIT – R50 / R52 / R53. ? Quality Used Mini Parts. This listing is for a genuine BMW Mini R56 rear trailing arm conversion kit to upgrade R50, R52 and R53 models to the later R56 rear suspension setup. Complete Conversion Kit Includes. 2 × Genuine R56 rear trailing arms. 4 × Torsion bars. 2 × Rear shock absorbers. All mounting bolts and fixings. Everything required to carry out the R56 rear trailing arm upgrade on your R50, R52 or R53 is included. ABS sensors are not included. Please message us before purchasing if you would like to add these. Genuine BMW Mini parts. Fully inspected prior to removal. Clean and ready to fit. Minor cosmetic marks may be present, consistent with a used part. Ideal for anyone looking to upgrade to the stronger and improved R56 rear suspension setup. Collection welcome by arrangement. We offer genuine used BMW Mini parts at competitive prices, If you can’t find the part you’re looking for, send us a message we’re likely to have it in stock. We also offer a Fitting service available at our workshop based in Pontypridd South wales by appointment only for all your MINI Needs. ? Please ensure compatibility before purchasing.

]]> https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-3/feed/ 0 https://conversionupgradekit.com/bmw-mini-r56-rear-arm-trailing-kit-r53-r52-r50-upgrade-conversion-kit-2001-2007/ https://conversionupgradekit.com/bmw-mini-r56-rear-arm-trailing-kit-r53-r52-r50-upgrade-conversion-kit-2001-2007/#comments Tue, 25 Aug 2026 06:04:37 +0000 https://conversionupgradekit.com/bmw-mini-r56-rear-arm-trailing-kit-r53-r52-r50-upgrade-conversion-kit-2001-2007/


BMW MINI GENUINE R56 REAR TRAILING ARM UPGRADE / CONVERSION KIT – R50 / R52 / R53. ? Quality Used Mini Parts. This listing is for a genuine BMW Mini R56 rear trailing arm conversion kit to upgrade R50, R52 and R53 models to the later R56 rear suspension setup. Complete Conversion Kit Includes. 2 × Genuine R56 rear trailing arms. 4 × Torsion bars. 2 × Rear shock absorbers. All mounting bolts and fixings. Everything required to carry out the R56 rear trailing arm upgrade on your R50, R52 or R53 is included. ABS sensors are not included. Please message us before purchasing if you would like to add these. Genuine BMW Mini parts. Fully inspected prior to removal. Clean and ready to fit. Minor cosmetic marks may be present, consistent with a used part. Ideal for anyone looking to upgrade to the stronger and improved R56 rear suspension setup. Collection welcome by arrangement. We offer genuine used BMW Mini parts at competitive prices, If you can’t find the part you’re looking for, send us a message we’re likely to have it in stock. We also offer a Fitting service available at our workshop based in Pontypridd South wales by appointment only for all your MINI Needs. ? Please ensure compatibility before purchasing.

]]> https://conversionupgradekit.com/bmw-mini-r56-rear-arm-trailing-kit-r53-r52-r50-upgrade-conversion-kit-2001-2007/feed/ 0 https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-2/ https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-2/#comments Mon, 17 Aug 2026 17:48:52 +0000 https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-2/











Genuine Mini Cooper R56 Trailing Arm Kit/Set for R53 R52 R50 Rear Axle Upgrade/Conversion Includes: Trailing Arms, Shock Absorbers, Tie Links, ABS Sensors, bearings, nuts and bolts. Perfect to replace the heavy and corroded Steel Trailing Arms on an R50 R52 or R53 First Generation Mini. Originally these were fitted to a Mini GP R53 reducing the weight of the vehicle. Ideal if you have a race car. And now they are fitted as standard to R55 R56 R57 R58 R59 models of Mini. The kits comes exactly as pictured, with bearings. Genuine used BMW Mini part. Our main aim is to provide outstanding customer service and fully satisfy our clients. We do our best to quickly respond to your inquiry. We do have a lot of parts for almost every BMW, MINI and Mercedes-Benz model. Feel free to ask for any other BMW, MINI and Mercedes-Benz car parts, we are always happy to help. VEHICLE COMPATIBILITY PLEASE NOTE that the vehicle compatibility list is for information purposes only, does not guarantee correct part fitments to your vehicle and may fit other models. Other locations in the UK will be more expensive. CONDITION This item is used but is in good condition and is in full working order. We will ALWAYS try our best to help.

]]> https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion-2/feed/ 0 https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole-2/ https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole-2/#comments Wed, 05 Aug 2026 05:22:43 +0000 https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole-2/










JMCHstore Mini Bike Weld on Drum to Disc Brake Wheel Conversion Kit. Transform Your Mini Bike’s Braking System! This conversion kit is designed for various mini bike models, providing an efficient solution to upgrade your braking system. Drum to Disc Conversion Solution: Easily converts your existing drum brake wheel into a disc brake setup without the need to change the wheel or tire. No Tire Removal Required: Welds directly onto the original drum hub, saving you labor time and eliminating the hassle of tire dismounting. Weld Plate with Pre-Welded Nuts: Features rear-mounted welded nuts that allow for secure rotor attachment after welding, ensuring proper alignment. Includes 160mm Brake Rotor: Comes equipped with a standard 160mm disc rotor compatible with mini bike hydraulic brake systems and 63mm hydraulic brake calipers, delivering strong and responsive braking performance. Improved Braking Performance: Enjoy stronger stopping power and more consistent braking compared to traditional drum brakes. Heavy-Duty Steel Construction: Crafted from durable steel, this kit is built for long-term strength and reliability even in high-load riding conditions. This kit does not fit Baja DB30 mini bikes. Professional welding is strongly recommended for optimal results. Upgrade your mini bike today and experience the difference in performance with our reliable drum to disc brake conversion kit!

]]> https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole-2/feed/ 0 https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole/ https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole/#comments Wed, 24 Jun 2026 15:41:09 +0000 https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole/










JMCHstore Mini Bike Weld on Drum to Disc Brake Wheel Conversion Kit. Transform Your Mini Bike’s Braking System! This innovative conversion kit is designed for various mini bike models, providing a seamless upgrade from drum brakes to disc brakes. Please note that this kit does not fit the Baja DB30 mini bike. Welding Required: Professional welding is strongly recommended for optimal performance. Drum to Disc Conversion Solution: Easily converts your existing drum brake wheel into a disc brake setup without the need for new wheels or tires. No Tire Removal Required: Designed to weld directly onto the original drum hub, saving you time and eliminating the hassle of tire dismounting. Weld Plate with Pre-Welded Nuts: Features rear-mounted welded nuts that allow the rotor to bolt on securely after welding, ensuring perfect alignment. Includes 160mm Brake Rotor: Comes with a standard 160mm disc rotor compatible with mini bike hydraulic brake systems and 63mm hydraulic brake calipers for enhanced braking performance. Improved Braking Performance: Experience stronger stopping power and more consistent braking with hydraulic disc brakes compared to traditional drum brakes. Heavy-Duty Steel Construction: Crafted from durable steel, this kit is built to withstand high-load riding conditions for long-term reliability. Upgrade your mini bike today and enjoy enhanced safety and performance on every ride!

]]> https://conversionupgradekit.com/hydraulic-brake-conversion-kit-for-mini-bikes-drum-to-disc-upgrade-4-hole/feed/ 0 https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-5/ https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-5/#comments Thu, 05 Feb 2026 15:57:39 +0000 https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-5/


Complete Alloy Machined Conversion Kit Upgrade for Losi 1/18 Mini LMT LOS01026. 14 Years & Up. Item# C34097GREEN Barcode: 91789048156. Compatible Fuel Type: Electric. Age Level: 14 Years & Up. Fitment and Installation Notes. A majority of our aluminum upgrade kits, conversions, and alloy parts are designed to replace, modify, or upgrade the stock plastic parts with aluminum versions. Products may feature a different design language that may not be identical in design to the OEM version. Unless specified, not all products include new hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. That is different from what is originally shown in the website product photos; however, any alternates will be compatible hardware that will not affect the functionality of the product. Most of our products DO NOT include instructions, and are meant to be completely installed by an experienced hobbyist; this includes product assembly/disassembly, any set-up and adjustment, and periodic maintenance. Third party products may have available instructions online from their respective manufacturers. All products will require some prep out of the package. Some items shocks, gearboxes, axles, etc. Are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, anti-seize, grease, or liquid thread lock for critical fasteners and any metal to metal contact. Do not just install the item out of the package and assume they are prepped correctly. Check, adjust, and set/reset all new items when taken out of the package. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items that are different from the OEM part may require modification to the vehicle for proper clearance. Some products are designed with tighter tolerances and/or include parts that need some pre-race or “break-in” periods in order to get the item into condition for regular use. Snow and sand tracks need to be broken-in to stretch to the correct tension, and new tires need to lose a small amount of the outer surface to expose the actual tire tread that will give traction. This break-in period also allows you to see that everything is working properly before giving it “full gas”. A proper break-in basically consists of driving your vehicle with the new parts installed at slow to medium speeds, with smooth throttle modulation. Do not go full throttle, do not do large jumps, and any high-stress activities yet. The break-in process should only last around 2-3 battery packs (or 2-3 tanks of fuel if nitro). Upon completing break-in, be sure to recheck, adjust, and set/reset the items. Suspension shocks (individual and sets) may be packaged partially assembled for display purposes only and require standard shock prep before installation and usage. All new shocks should be cleaned, reassembled, and may require RC-grade silicone shock oil before being used. Shocks need to be cycled so that the internal seals can conform to the shock shaft and body, during the initial break-in period shock may partially leak until the seals are seated correctly. Wheel and tire sets may be packaged partially assembled for display purposes only and require standard wheel/tire prep before installation and usage. All wheels and tires should be cleaned, reassembled, and may require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description). Integy-branded items are designed and tested to be compatible with the vehicle’s OEM parts but may not be compatible with other branded aftermarket parts. We do not guarantee compatibility with vehicles using third-party branded products. Some Integy-branded items may be only compatible with the vehicle’s OEM parts but not with another Integy-branded item due to design limitations. Some items that are different from the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. We carry thousands of anodized alloy parts, and for the most part the colors specified i. Match or are very close to each other in terms of color shade, but the reality of anodizing is that it is almost impossible to match every production run exactly as the last. Variations in color shade can be attributed, but not limited to the following factors: material content, ambient conditions during manufacturing, and place of manufacture. Because of this, we cannot guarantee 100% that all anodized colors of a particular shade will match 100%. For example: not all “blue” products will be the exact same shade of blue as other products. Thus, what is shown in the product photo (including the shade/color) is as accurate as possible to the real-world color of the part we have available. Often we will try to color match the OEM chassis colors (when possible), but we do not guarantee an exact color match. Also, we do not color-match with other aftermarket brands; the color/shade of color we show on our website and product photos is the color/shade of color we sell. We can only offer limited services for these 3rd-party branded items (subject to availability). This is a new Text block. Since 2010, RC Option has been a trusted retailer in the RC hobby. With over a decade of experience, our store has provided RC enthusiasts a place to get all of their RC needs, from ready-to-run cars and boats, to replacement and upgraded wheels and tires, electronic equipment, scale crawler accessories, and more. We offer products from many well-known brands such as Integy, 3Racing, SkyRC, MuchMore, RC Square, and more. From weekend hobbyists to competitive racers, we’re proud to provide all RC enthusiasts a place to find exactly what they need! Billet Machined Alloy Chassis Linkage (8) for Tamiya CR01. Super Light Weight Antenna Mount. Billet Machined Bulkhead Brace (2) for HPI 1/8 Savage-X, 21 & 25 Monster Truck. High Flow Air Filter for Losi 1/8 LST Monster Truck. Replacement Straight 200mm Long 2mm Stainless Steel Shaft for RC Boats. Replacement Parts for T7030. Billet Machined Wheel 17mm Hex Rear Adapter(2) +3mm Offset for Traxxas 1/10 Jato. Evolution-RS Rear Lower Arm for Traxxas 1/10 Revo 3.3, E-Revo. Billet Machined Motor Coupler L=25mm 3.17mm Shaft to 4mm Shaft for RC Boat. Nylon Rudder Assembly Height=36mm w/ Steering Arm 2mm Hole for RC Boat. Evo-4 Rear Skid Plate for T-Maxx 3.3 3903 3905 3906 3908 4907 4908 4909 4910. Replacement 4mm Shock Shaft for T6723 Type Shock. Billet Machined Motor Coupler L=25mm 3mm Shaft to 3.17mm Shaft for RC Boat. Rear Type II Skid Plate for E/T-Maxx (3903 3905 3906 3908 4907 4908 4909 4910). Twin Motor Cooling Fan + Heatsink 540/550. Surpass Alloy Heatsink & Twin Cooling Fan for 40mm O. Add suggested items to your listings.

]]> https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-5/feed/ 0 https://conversionupgradekit.com/bmw-mini-r56-rear-trailing-arm-kit-set-r50-r52-r53-upgrade-conversion-2001-2006/ https://conversionupgradekit.com/bmw-mini-r56-rear-trailing-arm-kit-set-r50-r52-r53-upgrade-conversion-2001-2006/#comments Wed, 04 Feb 2026 15:55:45 +0000 https://conversionupgradekit.com/bmw-mini-r56-rear-trailing-arm-kit-set-r50-r52-r53-upgrade-conversion-2001-2006/




Same Day dispatch if ordered before 13.00. Please note that parts listed are used and such can have wear and tear marks. If you not sure about the item fitting your vehicle please get in touch with reg or vin nr and we will check on our Database if this parts are compatible with you vehicle. Some large items are offered only as collection due to possible damage in transport such as (bumpers / glass / large bonnets and oversize items) most of large or heavy items are sent with pallet company what can be costly so we offer possibility for collection on all items. All used parts are tested before removal and are in working order.

]]> https://conversionupgradekit.com/bmw-mini-r56-rear-trailing-arm-kit-set-r50-r52-r53-upgrade-conversion-2001-2006/feed/ 0 https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion/ https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion/#comments Thu, 29 Jan 2026 15:43:47 +0000 https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion/
























Genuine Rear Trailing Arm Kit Set R53 R52 R50 Upgrade Conversion. Mini Cooper S R56. OEM Part number : 6780001 / 6780002 / 6799087 / 6799088 / 6768724 / 6768726 / 6851501 / 22270185 / 22270186. There is a picture with a part number! Please verify fitment by the part number provided.

]]> https://conversionupgradekit.com/bmw-mini-genuine-r56-rear-trailing-arm-kit-set-r53-r52-r50-upgrade-conversion/feed/ 0 https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-4/ https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-4/#comments Wed, 07 Jan 2026 14:48:40 +0000 https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-4/


Item# C34097BLACK Barcode: 91789048154.

]]> https://conversionupgradekit.com/complete-alloy-machined-conversion-kit-upgrade-for-losi-118-mini-lmt-los01026-4/feed/ 0 https://conversionupgradekit.com/h3-led-headlight-bulbs-mini-design-upgraded-chips-extremely-bright-12000-2/ https://conversionupgradekit.com/h3-led-headlight-bulbs-mini-design-upgraded-chips-extremely-bright-12000-2/#comments Fri, 02 Jan 2026 14:38:48 +0000 https://conversionupgradekit.com/h3-led-headlight-bulbs-mini-design-upgraded-chips-extremely-bright-12000-2/






Specifications: Light type: H3 Light Source Model: CREE Chips Light Color: 6500K Xenon White Input Power: 55W Luminous Flux: 12000 Lumens Output(6000Lms per bulb) Operating Voltage: DC 9-32V(fit 12V vehicles) IP Rate: IP68(Strong Waterproof) Material: Aviation 6063 aluminum profile Heat Dissipation: Aluminum area integrated heat sink Operating temperature: -40C to +80C Viewing Angle: 360 degree low beam, 360 degree high beam Life Span: Over 30,000 hours Guarantee: 2 Years Certificates: CE/RoHs Placement on Auto Vehicle, Truck, Van, SUV, ATV and Motorcycle: Left, Right, Front on Headlight. Benefits: 360 degree Adjustable Collar Ring, convenient for you to adjust for the best light effect. Built with high power premium quality LEDs of Nwest CREE Chips, these LED headlight bulbs will cast a precise light beam that will give you increased visibility and a wider viewing angle with 360 degree viewing Angle. Stainless Aluminum CREE Chips fix the bulb stably, Shock-proof and better to focus spotlight. Over 30,000 hours, much longer lifetime over conventional halogen bulbs. Simple installation-Mini Design, Almost 1:1 size same as the stock bulbs. Plug & play no relays, usually in 10 minutes or less. Within 2 years no reason return. Package Included: 2Pcs LED Headlight, 1Pcs English Installation Manual Hope you have a happy online shopping, please kindly search to find more suitable LED Headlight Bulbs for your car Features. H3 Led Headlight Bulbs(Pack of 2)Custom square micro lamp beads on compact body, 6500K Xenon White, Operate at 55W(27.5 W per bulb). Long Lifespan: 30,000 Hours, Operating Voltage:DC 9-30V(fit 12V, 24V vehicles). 12000 Lumens Output(6000Lms per bulb). High Lumens and Extremely Bright. Efficiently Cooling Design Special aluminum alloy shell and powerful cooling fan with much less noise provide strong cooling wind to help dissipate the heat generated which leads a longer lifespan up to 30,000 hours. Little CreativitySmall body for strong fit, it can be used on 99% vehicle models. Compatible with H3 Led Headlight Bulbs, apply as LED Headlight Bulbs, LED Fog Light Bulbs and DRL Daytime Running Light Conversion Kit. 1:1 Design & No PolarityEasy InstallationMini Design. Almost 1:1 size same as the stock bulbs. Compatible fitment size and Non-polarity design, Easy installation, just Plug & Play. The adapter ring could be rotated 360 degrees seamlessly, simple 10 minutes installation. Meticulously Engineered Beam Angular. We’ll respond within 24 hours on weekdays. The bulbs are equipped with CAN-BUS system, but for some special cars may require additional load resistors to by pass the error code/flash issue.

]]> https://conversionupgradekit.com/h3-led-headlight-bulbs-mini-design-upgraded-chips-extremely-bright-12000-2/feed/ 0