Now updated to the Ultraflex4x4 GTW harness. Working High Beam Light garanteed and is a PnP install. No balance resistors to waste your time. The look the same but they are NOT. From my testing they are 7.7W on low beam and 33 W on High beam.. With poor beam pattern and high glare. LED Conversion PAR56, 7 Round, 72102, 72002, 72006, 002395301, 002395991, 002395801, 002395071, H6024, L6024, 72040, 72050. ADR 13/00 6.2.9. SAE, DOT, and E Mark. ADR 46/00 section 7.8 & 7.9. Now includes the Negative switching conversion Harness. 7 Round lights direct replacement of sealed beam and H4 no mucking around, Plug and Play. 105 Watts not 26 or 30 watts like others. These have DRL (White Parker) and Orange TURN indicator. On low beam they are 25W on High Beam they are 105W and include the 25W from the low beam to give good road coverage. Toyota and other negative switching vehicles requires an additional harness kit. These lights are also available in 130W 66% brighter on high beam. It is advisable to call tech support to sort out any resistance changes needed for the harness. Yes these are Hi/Lo beam head lamps. LEDs are POLARISED i. They have + and – terminals. These replace H4 and H13 connectors are supplied mainly for Jeep. Lights of the 7 round type found in Most older and classic Fords, Jeeps, Toyotas, Land Rovers, Nissan’s, Harley Davidson and trucks. Proven off road and river crossings! I was asked to find these lights by a few local 4×4 clubs searching for better lights. I only sell things that I have personally used, and others have tested. That’s how a 4×4 club works! You can tell the poor quality ones. They have straight led bars not curved, you can see the individual LEDs. They also do not have molded end plugs, and Breathers at the rear. You CAN water jet clean these. Listed else where be quick these are the first Legal high Wattage Lights available in Australia. Much better than HID. Come with integrated parker / DRL with 2 x Female spade connectors fitted and a H4 style 3 pin connector. Face to back they are 65mm. Rear mounting Holes are M8 and bracket (not supplied) width at back is 85mm 2 x M8 holes are separated by 15 mm centre to centre. They suite Jeeps, Nissan’s, Harleys (with rear mounting) Range Rover Classic (RRC) Defender, many trucks. I’m stoked at these lights so I thought I’d offer them to the general public after all the testing we’ve done. Weight is 2.5 KG per pair. New stock arriving every week. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Bulbs\Light Bulbs & LEDs”. The seller is “ultraflex4x4-com” and is located in this country: AU. This item can be shipped worldwide.

• Bulb Life Hours: Up to 30,000 Hours
• Wattage: 105 W
• Light Colour: Cold White
• Type: Headlight Kit
• Features: Ballast Included
• Colour Temperature: 6000K
• Manufacturer Part Number: UF-7-105B
• Bulb Colour: 6000K
• Modified Item: No
• To Fit: Headlight
• Custom Bundle: No
• Placement on Vehicle: Front
• Universal Fitment: Yes
• Non-Domestic Product: No
• Includes Harness Kit: YES
• Lighting Technology: LED
• Brand: ULTRAFLEX4x4
• Manufacturer Warranty: 2 Years
• Suitable For: Headlight
• Full DIY kit: YES
• Bulb Size: 105W
• Warranty: 2 Year
• Number of Bulbs: 2
• Voltage: 10-16V